Product ID:DS505, HOT DIP STRIPPABLE COATING-TYPE 1
MSDS Date:02/19/1991
FSC:8030
NIIN:00N031545
MSDS Number: BNSGW

DIP SEAL PLASTICS INC

2311 23RD AVE
ROCKFORD, IL 61108-7392
US

Emergency Phone: 815-398-3533

Info Phone: 815-398-3533

Cage: 29437

DIP SEAL PLASTICS, INC.

ROCKFORD, IL 61108

Telephone: (815) 398-3533

Cage: 29437

MINERAL OIL, PETROLEUM DISTILLATES, SOLVENT-DEWAXED HEAVY

CAS: 64742-65-0

RTECS: PY8038500

Fraction By Weight: 65%

OSHA PEL 5 MG/M3 (OIL MIST)

ACGIH TLV: 5MG/M3;10 STEL(MIST)

PHTHALIC ACID, BENZYL BUTYL ESTER;(BUTYL BENZYL PHTHALATE)

CAS: 85-68-7

RTECS: TH9990000

Fraction By Weight: <5%

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

FATTY ACID, SOYBEAN OIL, EPOXIDIZED;(EPOXIDIZED SOY BEAN

CAS: 8013-07-8

RTECS: LH8010000

Fraction By Weight: <5%

PARAFFIN WAX CONSISTING OF INGREDIENTS 5 & 6.

RTECS: 9999999ZZ

Fraction By Weight: <5%

PARAFFIN WAX

CAS: 64742-43-4

OSHA PEL 2 MG/M3 (FUME)

ACGIH TLV: 2 MG/M3 (FUME)

PETROLEUM WAX

CAS: 63231-60-7

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE/SKIN:MELTED COMPOUND CAN CAUSE
SEVERE BURNS. INHAL:NO SIGNIFICANT NASAL OR RESPIRATORY IRRITATION
IS EXPECTED. INGEST:COMPARATIVELY NON-HAZARDOUS AT ROOM
TEMPERATURE. CHRONIC:NONE ESTABLISHED.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYE:FLUSH WITH LARGE VOLUMES OF WATER FOR AT LEAST 15
MINUTES. GET MD. SKIN:COOL AT ONCE! IF 2ND OR 3RD DEGREE BURNS ARE
EXPECTED, GET MD. INHAL:MOVE TO FRESH AIR. INGEST:SMALL AMOUNTS ARE
ESSENTIALLY HARMLESS. INGEST:CALL MD IMMEDIATELY .

Flash Point Method:COC
Flash Point:395F,202C
Extinguishing Media:WATER FOG, DRY CHEMICAL, FOAM & CO2.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:WHEN HEATED ABOVE THE FLASH POINT,
MATERIAL WILL RELEASE FLAMMABLE VAPORS WHICH CAN BURN OR BE
EXPLOSIVE IN CONFINED SPACES & EXPOSED TO SOURCE OF IGNITION.

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION AROUND SPILL
AREA.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN A COOL, DRY AREA.
Other Precautions:MELTED DIP SEAL WILL PRODUCE SEVERE BURNS IF GOTTEN
ON BODY.

Respiratory Protection:NONE NEEDED. NIOSH/MSHA APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST PREFERRED.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:N1
Boiling Pt:B.P. Text:>400F,>204C
Vapor Pres:<0.1
Vapor Density:>10
Spec Gravity:0.96
Evaporation Rate & Reference:<1 (BUTYL ACETATE-1)
Solubility in Water:NEGLIGIBLE BY WEIGHT
Percent Volatiles by Volume:0.1

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, STRONG ACIDS, AND ALKALIS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:INCOMPLETE COMBUSTION MAY PRODUCE CO.
Conditions to Avoid Polymerization:DIPPING TEMPERATURES IN EXCESS OF
350F.

Waste Disposal Methods:DISPOSE OF CONTAMINATED MATERIAL IN AN APPROVED
DISPOSAL SITE, COMPLY WITH FEDERAL, STATE AND LOCAL REGULATIONS
CONCERNING WASTE DISPOSAL INTO LANDFILLS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.